FSW WORLDWIDE

[RSub]

I don't think this FAQ applies to your case cos you are not getting the same error. Post a screenshot of the pop-up msg you get after you validate your forms.

I am not getting an error. But the below message is very confusing. Moreover, I am unable to type my name under consent section. Not sure if I can submit the form without typing the name.

 

[RSub]

Here is link with instructions to fill this form. I'll suggest you follow it and nothing else :
https://www.canada.ca/en/immigration-refugees-citizenship/services/application/application-forms-guides/complete-0008-5669.html

It says:

Consent and Declaration of Applicant

1. Once the application is completed, click on the “Validate” button located at the top or bottom of the form. This will generate a barcode page or pages (see image below).
   
   Note: This barcode page will not appear if you fill out your application by hand.
2. Print all pages of your application form.
3. Read all of the statements in all sections carefully and
   1. write your name in the space provided.
   2. check the appropriate box to indicate if you agree that the information contained in this application related to your intended occupation, education and work experience may be shared with prospective employers in order to assist them in hiring workers
   3. sign, with a handwritten signature, and date in the spaces provided
4. By signing, you certify that you fully understand the questions asked, and that the information you have provided is complete, truthful, and correct. If you do not sign and date, the application will be returned to you.
5. Place the barcode page(s) on the top of your application (forms and supporting documents) when you submit it.

I saw this too and that's when confusion started. Here it says print. But after clicking validate, the form instructs not to print.

 

[wonderbly]

I am not getting an error. But the below message is very confusing. Moreover, I am unable to type my name under consent section. Not sure if I can submit the form without typing the name.

Oh waittttttttt, I've seen this message before. I got it on one of the forms I filled in for study permit (I believe it was this IMM0008). I didn't print it out to sign. I only added the date . I'm sure of it.

 

[RSub]

Here is link with instructions to fill this form. I'll suggest you follow it and nothing else :
https://www.canada.ca/en/immigration-refugees-citizenship/services/application/application-forms-guides/complete-0008-5669.html

It says:

Consent and Declaration of Applicant

1. Once the application is completed, click on the “Validate” button located at the top or bottom of the form. This will generate a barcode page or pages (see image below).
   
   Note: This barcode page will not appear if you fill out your application by hand.
2. Print all pages of your application form.
3. Read all of the statements in all sections carefully and
   1. write your name in the space provided.
   2. check the appropriate box to indicate if you agree that the information contained in this application related to your intended occupation, education and work experience may be shared with prospective employers in order to assist them in hiring workers
   3. sign, with a handwritten signature, and date in the spaces provided
4. By signing, you certify that you fully understand the questions asked, and that the information you have provided is complete, truthful, and correct. If you do not sign and date, the application will be returned to you.
5. Place the barcode page(s) on the top of your application (forms and supporting documents) when you submit it.

I think I will have to print the document coz I cannot merge the IMM 0008 document with other documents without printing and scanning. So fuck IRCC, I am just gonna print, scan and sign the fuck out of it.

 

[wonderbly]

I think I will have to print the document coz I cannot merge the IMM 0008 document with other documents without printing and scanning. So fuck IRCC, I am just gonna print, scan and sign the fuck out of it.

Yeah, they didn't say you SHOULD not print, they just say you don't have to. So nothing wrong with printing and scanning back like we do for Schedule A.

Filling IRCC's forms is worse than pulling teeth .

 

[RSub]

Yeah, they didn't say you SHOULD not print, they just say you don't have to. So nothing wrong with printing and scanning back like we do for Schedule A.

Filling IRCC's forms is worse than pulling teeth .

Its a nightmare.

 

[RSub]

Oh waittttttttt, I've seen this message before. I got it on one of the forms I filled in for study permit (I believe it was this IMM0008). I didn't print it out to sign. I only added the date . I'm sure of it.

Oh wow. My head hurts now.

 

[Elnora]

Hey guys I received my PPR yesterday at last...the wait is finally over


AOR Feb 19th 2021


FSW OUTLANDER


COR: NIGERIA


REMEDICAL: feb 26th 2022


Remedical passed: March 16th


PPR: April 26th 2022


A little more hope and you all will get yours

 

[wonderbly]

Hey guys I received my PPR yesterday at last...the wait is finally over


AOR Feb 19th 2021


FSW OUTLANDER


COR: NIGERIA


REMEDICAL: feb 26th 2022


Remedical passed: March 16th


PPR: April 26th 2022


A little more hope and you all will get yours

Congratulations! But take back the "Finally" .

 

[oinkario]

Congratulations! But take back the "Finally" .

At least it’s not Feb 2022 AOR which I’ve seen one. That freaking “finally” hurt me bad mannn

 

[sampiu1989]

Hii guys
Have a query
Applied for PR in Jan 2021, I am the outland dependent applicant
Didn’t rcv any BIL after AOR
Then applied visitor visa in Sept 2021 with same UCI as PR and provided Biometrics for Visitor Visa which was also updated for the PR application. Already raised a webform in October 2021 for the same.
Recently we have received BIL along with some other ADRs
But the biometrics details are already linked since it’s the same UCI
Any idea what to do? Please suggest…

 

[wonderbly]

Hii guys
Have a query
Applied for PR in Jan 2021, I am the outland dependent applicant
Didn’t rcv any BIL after AOR
Then applied visitor visa in Sept 2021 with same UCI as PR and provided Biometrics for Visitor Visa which was also updated for the PR application. Already raised a webform in October 2021 for the same.
Recently we have received BIL along with some other ADRs
But the biometrics details are already linked since it’s the same UCI
Any idea what to do? Please suggest…

You shouldn't need to do biometrics again. Upload a LOE stating you already did bio and it has already been updated on your profile.

 

[Rkb94]

I am not sure,@Rkb94 ,He has never mentioned about traveling in 5 eye countries we have similar time line.

I have been to USA as a visitor.

Although I don't think if that is the case, because I have seen people who have never visited any other country before, had similar ADR and AOR timeline yet their file processed within a week after submitting additional documents while it took almost a month for me. And i think security started for me on April 5th when I got IP2 GU.

 

[ImpatientAlligator]

God damn.

I want the anxiety to freaking end.

I keep checking my mail every evening and followed by checking my profile. When I wake up, I do the same even though I am barely awake during that time.

Why ask us to hurry up to submit time-sensitive documents when they aren't even going to bother to process them. The worse is when I see all those 3 months old "finally" posts. I have been waiting for 20 months now. Give me a flipping break.

Don't know why we're the chosen ones.

It's been almost 8 weeks since I did the re-medicals and submitted the ADR. Radio silence except for copy-paste responses to the webforms that I sent. Security still hasn't started as of today and no response yet to the Mandamus notice either (almost 2 weeks now).

Even my work permit application has gone past the 8 week advertised processing time with no response so far.

If only I'd known 2 years ago....

 

[Rkb94]

Don't know why we're the chosen ones.

It's been almost 8 weeks since I did the re-medicals and submitted the ADR. Radio silence except for copy-paste responses to the webforms that I sent. Security still hasn't started as of today and no response yet to the Mandamus notice either (almost 2 weeks now).

Even my work permit application has gone past the 8 week advertised processing time with no response so far.

If only I'd known 2 years ago....

The more we want it to process quickly, the more it delays.